China Slip Roll Machine Product Information A Slip Roll Forming Machine is a machine that creates specified shapes out of long strips of metal. In most cases, the piece's requisite cross-section profile is carefully engineered to allow the machine to bend the metal as needed. These machines execute a variety of metalworking tasks, including material cutting and roll punching, in addition to roll forming. The majority of roll forming machines operate in a continuous cycle. The material is put into the machine, where it continues to go through the phases of each operation until the final product is completed. Features With a rapid release of the upper roller, hardened steel gear, high-strength steel coil, precise grinding iron roller, and top roller swing, the Slip Roll Forming Machine is simple to use manually. Not only can our sliding roller machine wind wire, but it can also form the material into a cone shape. To remove the treated workpiece from our sliding roller machine, just pull out the upper shaft. Additionally, it contains adequate lubrication, which aids in the reduction of wear. Item No.HR202001HR202002 ModelRM08RM18 Capacity0.8mm/22Ga0.8mm/22Ga Throat depth177mm/7銆?/sup>457mm/18銆?/sup> Packing size锛坈m锛?/p>50脳45脳1673脳27脳14 N.W/G.W锛坘g锛?/p>22/24kg24/26kgChina Slip Roll Machine website:http://www.tzhrmachine.com/slip-roll-machine/